Step 1: Plug in, turn on the "ON" button on the side, the lights will light up. Step 2: Wait about 60 seconds, connect WiFi "Repeater-AC-2G or Repeater-AC-5G". Step 3: Log in IP "192.168.10.1", enter password "admin", click "Set Password" Step 4: Scan and select your WiFi Step 5: enter your WiFi password, click in "Save settings". Step 6: Setup completed, reconnect the new WiFi "your router name-2G" or "your router name-5G". How to reset: Press the WPS button on the extender for about 10 seconds. When the indicator on the extender goes off, flashes and stays on again, you can reset the settings. Frequently asked questions Q1. What is the role of WiFi extender? A: Increase the range of your existing WiFi and eliminate signal dead zones. Please note that it cannot increase the WiFi speed of your router, the WiFi speed will be reduced due to conversion loss. P2. Where should I place the WiFi extender? A: To find the best location, you can use your mobile phone or judge by the LED number of the indicator light to find a place where the original Wi-Fi signal (from your router) is good and in the middle between your router and the farthest place you want to extend. P3. Correct steps to factory reset the WiFi extender: Step 1: Unplug and plug in again, wait about 2 minutes (the WiFi extender configures the process). Waiting 2 minutes is a necessary step. Step 2: Then press the circle button for 10 seconds. (If the lights flash all the time, it means the reset fails.) Step 3: Wait another 2 minutes, then you will find the WiFi signal in the WiFi list.
